New Damper Assembly - Damper2

Lightweight Packable wood stoves

Re: New Damper Assembly - Damper2

Postby swisski » Tue Feb 10, 2015 5:47 pm

I had a quick question-

Do you advise putting sand or dirt at the bottom of your stoves for burning? I see that is recommended on some other sites for other stoves, but haven't really heard much about if that is needed for SO stoves.
swisski
 
Posts: 204
Joined: Wed Nov 19, 2014 10:19 pm

Re: New Damper Assembly - Damper2

Postby kevin_t » Tue Feb 10, 2015 6:19 pm

You can but we have never had issue with it. I've never done it


Sent from my iPhone using Tapatalk
kevin_t
 
Posts: 1144
Joined: Fri Mar 21, 2014 7:39 am

Re: New Damper Assembly - Damper2

Postby swisski » Thu Feb 19, 2015 9:15 am

I had a question about seating the damper into the top of the stove.

About how far in should I be able to wiggle/push it down? I wasn't sure if I should be able to get it to seat in fully so that none of the crimped part was visible or not, but I couldn't quite get it down that far and I was pushing with pretty good force, but I didn't want to over do it. It seemed fairly sturdy, I'm just not sure how far down is enough. Any input is appreciated. This is regarding the new V2 damper.
swisski
 
Posts: 204
Joined: Wed Nov 19, 2014 10:19 pm

Re: New Damper Assembly - Damper2

Postby kevin_t » Thu Feb 19, 2015 10:39 am

It is not needed to seat it all the way to the bead, just make sure it is seated in well. Sometimes a little twisting helps as well.

You want the damper in the stove pretty securely
kevin_t
 
Posts: 1144
Joined: Fri Mar 21, 2014 7:39 am

Re: New Damper Assembly - Damper2

Postby reaper » Tue Feb 24, 2015 8:16 am

pictures of the collar with 2 sparks arrester???...saw this on the website but no pictures yet.
reaper
 
Posts: 510
Joined: Tue Dec 30, 2014 3:55 am

Re: New Damper Assembly - Damper2

Postby reaper » Sat Apr 18, 2015 4:27 am

still have no pictures for the Slide In Spark Arrestor on the website Kevin...i need to see what it looks like and what comes with it.
reaper
 
Posts: 510
Joined: Tue Dec 30, 2014 3:55 am

Re: New Damper Assembly - Damper2

Postby kevin_t » Sat Apr 18, 2015 4:36 am

http://store.seekoutside.com/spark-arrestor-ultra/

Not slide in


Sent from my iPhone using Tapatalk
kevin_t
 
Posts: 1144
Joined: Fri Mar 21, 2014 7:39 am

Re: New Damper Assembly - Damper2

Postby reaper » Sat Apr 18, 2015 7:10 am

yeah i saw this one.Ha ok you doesnt make the one i am talking about anymore.thanks Kevin.
reaper
 
Posts: 510
Joined: Tue Dec 30, 2014 3:55 am

Re: New Damper Assembly - Damper2

Postby kevin_t » Sat Apr 18, 2015 8:36 am

We might have a slide in or two around will have to check


Sent from my iPhone using Tapatalk
kevin_t
 
Posts: 1144
Joined: Fri Mar 21, 2014 7:39 am

Previous

Return to Wood Stoves

x