load transmission

Lightweight Packable wood stoves

load transmission

Postby Andy BB » Fri Aug 28, 2015 4:50 pm

Just a passing thought! At present the weight from any pots placed on top of the stove is transmitted via the stove sides. Would it not be better to transfer the weight diretly through the legs to the ground, therefore bypassing the compression forces on the stove sides. This could be done either by putting a fixed nut underneath the top surface, instead of a pass-through hole as at present, that the leg would screw into, or instead using a weld nut on the underside of the surface (with the flat face on the "top") cinched up to the butterfly nut on the top-side. The latter is more fiddly but has the benefit of using existing parts already supplied, the former is preferable but would need minor redesign.
Andy BB
 
Posts: 32
Joined: Tue Jul 16, 2013 2:51 am

Re: load transmission

Postby kevin_t » Fri Aug 28, 2015 6:05 pm

Agreed it can be done using the 2nd method with parts supplied however it is a little more fiddly. I do think long term it is better especially if doing heavy cooking . I would certainly suggest customers can use it. The fiddle may create confusion


Sent from my iPhone using Tapatalk
kevin_t
 
Posts: 1144
Joined: Fri Mar 21, 2014 7:39 am


Return to Wood Stoves

cron

x